News

News

Home > News

Various powders, with different proportions, can the horizontal ribbon blender mix them evenly?

2026-06-04

“I’m going to three kinds of powder mixing, mixing ratio for 1:4:4. With a horizontal mixer, will there be clumping of auxiliary materials, or uneven distribution of main materials?”

This is an inquiry sent by a food processing customer last week. It is believed that this is also the most concerned issue for many customers who plan to purchase mixing equipment: Can a horizontal mixer achieve a CV value of less than 5% when the ratio difference is twice as much?

The answer is: Yes.

Stainless Steel Ribbon Blender

Food Powder Horizontal Mixing Machine

What is the difficulty of mixing 1:4:4 ratio?

1. Different mixing ratio

The two main materials have the same proportion, if they have different movement paths with the auxiliary materials in the mixing process, it is easy to lead to high or low concentration of the auxiliary materials in the local area.

2. Density difference

Light powder is easily suspended in the upper part of the material layer, and heavy powder is sunk at the bottom. If the powder density needs to be mixed is different, it will lead to uneven mixing.

3. Secondary separation during discharging

Even if the mixture is evenly mixed in the mixing barrel, if the discharging method is improper, the powder may be separated again due to gravity and air when flowing out.

  • news26
  • news26
  • news26

What makes the horizontal double-screw mixer capable of solving this problem?

The inner helix quickly pushes the powder toward both ends, and the outer helix pulls the powder at both ends back to the middle. In this way, the powder can be inserted and cut in all directions in the mixing barrel to complete a high degree of mixing. The experimental results show that the concentration fluctuation of the auxiliary material detected at any sampling point can be controlled within ±2% after 8-10 minutes of mixing.

Powders with significant density differences, when processed by ordinary mixers with excessively high rotational speeds, the lighter powders will be carried to the top by the airflow and cannot be properly mixed. In contrast, the rotational speed of horizontal mixers is usually 30-60 rpm, which is suitable for the mixing of powders of different densities.

  • news26
  • news26
  • news26
For a 1:4:4 mixture of three powders, the horizontal double helix mixer is the most cost-effective and reliable choice available.

Before purchasing, the packing density and particle size distribution of the three kinds of powders should be provided, whether the materials are easy to absorb moisture and agglomerate, whether there is static electricity, and whether explosion-proof configuration is required. It is convenient for us to design the most suitable mixer for you according to your needs.

Home Tel Mail Inquiry